|
Q |
A |
Aircraft |
How many colours does the EVO Nano series has? |
4 kinds, namely Autel Orange, Arctic White, Blazing Red and Deep Space Grey. |
What is the weight of the body of EVO Nano series? |
The weight of the aircraft is ≤249g, the weight may vary depending on the production batch, please refer to the actual. EVO Nano series is exempt from registration in some countries or regions, please check the relevant local laws and regulations. |
What is the difference between EVO Nano and EVO Nano+? |
The only difference between the two products is the camera, and the rest of the performance is the same. |
How to activate the EVO Nano series aircraft? |
You need to connect your mobile phone to the remote controller, then pair with the aircraft through the Autel Sky app, and follow the instructions of the Autel Sky app to complete the activation. |
Does the EVO Nano series come with its own storage? |
The aircraft has no storage, but there is an SD card slot, which supports up to 256G storage expansion. |
Is the EVO Nano series waterproof? |
No. |
What is the maximum wind resistance of the EVO Nano series? |
The maximum wind resistance is level 5 (8.5~10.5m/s; 19~24mph). |
What is the maximum flight speed of the EVO Nano series? |
The EVO Nano series are all set with three flying gears: smooth gear, normal gear, and sports gear. The maximum flight speed in steady gear is 5m/s; the maximum flight speed in normal gear is 10m/s; the speed in sports gear can reach 15m/s. Users can switch in the App according to their proficiency in flight control and the actual flight environment. |
What is the maximum take-off altitude of the EVO Nano series? |
4000meters (13,123ft.) |
What is the maximum flying altitude of the EVO Nano series? |
800meters (2,624ft.), different countries or regions have different altitude restrictions. Please pay attention to local regulations when flying. |
Does the EVO Nano series have an obstacle avoidance function? |
Yes, the front, back and bottom of the aircraft are equipped with binocular vision perception system, so it can do three-way obstacle avoidance. |
Does the EVO Nano series support one-key return? |
Yes, when using one key to return, please set the return altitude and always observe the surrounding environment to avoid collision during the return. |
How to install the propeller correctly? |
1. Make sure the aircraft is turned off.
2. Pair the propeller with the dot mark with the arm with the dot, and the propeller without the dot mark is paired with to the arm without the dot.
3. Align the propeller round holes with the motor screw holes and lock the screws tightly. |
How often do the paddles need to be replaced? |
The paddles need to be inspected for deformation, wear, breakage and corrosion, and for loose paddle screws before flight. If these conditions exist, the blade and screws need to be replaced. |
Remote Controller & Image Transmission |
Is the remote controller of the EVO Nano series compatible with the EVO Lite series? |
Yes. |
Does the remote controller support HDMI output? |
No. |
What interfaces? does the remote controller have? |
The Type-C port on the bottom is for charging the remote controller, and the Type-C port on the top is for connecting mobile devices. |
Does the remote controller have custom buttons? |
A customizable function button is set in the upper left corner of the remote controller, which can be customized by Autel Sky app to set the following functions.
When you click/double click the custom button: obstacle avoidance on/off; AE lock/unlock; gimbal back to center/down; map/FPV switch. |
What is the effective image transmission range of the Nano Series? |
In an open area that is unobstructed and free of interference, the FCC standard is 10km (6.2miles). |
What is the resolution of the image transmission? |
The quality of real-time image transmission is affected by the surrounding environment, and the resolution can reach 2.7K/30FPS when the image transmission distance is less than 1km (0.62miles). |
What are the advantages of Autel SkyLink image transmission? |
Autel SkyLink supports 2.4 GHz/5.8 GHz/5.2GHz tri-band. Select dual band mode in Autel Sky app, and the connection band between the aircraft and the remote controllor will automatically switch between 2.4 GHz and 5.8 GHz/5.2GHz according to the interference situation. Autel SkyLink’s anti-interference performance and image transmission stability is also stronger. |
How to ensure the quality of signal transmission during the flight? |
The remote controller antenna is built into the phone holder, please adjust the angle of the antenna according to the position of the drone, i.e. let the top plane of the phone holder face the aircraft, and make sure there is no obstruction between the remote controller and the aircraft. |
How do I use the “mobile fast transfer” function? |
Smart phones can connect directly to the aircraft through the Wi-Fi, at this time, no remote controller is required, you can download photos and videos from the aircraft side to your smart phone at a transfer speed of up to 20MB/s through the Autel Sky App. The specific operations are as follows:
1. Make sure the aircraft is powered on and placed on the ground.
2. Run the Autel Sky App on your phone and connect to the aircraft via Wi-Fi pairing.
3. After successful connection, open the photo album, select the desired material and click the download icon to achieve high-speed file download.
Notes:
– Please use the fast transfer function in an interference-free and unobstructed environment, away from routers, Bluetooth headphones and other sources of interference.
– In countries and regions where 5.8GHz band is allowed by law, the maximum download rate can be achieved in an interference-free and unobstructed environment. If the local 5.8GHz band is not allowed, the download rate will be limited when using 2.4GHz band for transmission. |
Camera |
Does the EVO Nano series support replacement camera? |
No. |
By what means does the EVO Nano series camera increase stability? |
Three-axis mechanical stabilizer gimbal (pitch, yaw, roll) |
What camera sensor is used in the EVO Nano series? |
The EVO Nano has a 1/2-inch CMOS sensor with 48 effective megapixels; the EVO Nano+ has a 1/1.28-inch CMOS sensor with 50 effective megapixels. |
What is the maximum resolution of photos and videos that can be taken with the EVO Nano series? |
EVO Nano
Photo: 8000×6000 (4:3); 4000×3000 (4:3); 3840×2160 (16:9)
Video: 3840×2160 p30/25/24; 2720*1528 p30/25/24; 1920×1080 p60/p50/p48/p30/p25/p24
EVO Nano+
Photo: 8192×6144 (4:3); 4096*3072 (4:3); 3840*2160 (16:9)
Video: 3840×2160 p30/25/24; 2720*1528 p30/25/24; 1920×1080 p60/p50/p48/p30/p25/p24 |
What types of shooting formats are supported by the EVO Nano series? |
Photo:JPG/DNG
Video:MOV/MP4 |
Does the EVO Nano series support zoom? |
Supports 1 – 16x digital zoom. |
Does the EVO Nano series support shooting RAW format photos? |
Yes. |
What are the photo modes of EVO Nano series? |
Single shot, continuous shot, AEB, timer, HDR. |
Does the EVO Nano series camera support vertical shooting mode? |
Supports software cropping to obtain vertical screen images. |
Does the EVO Nano series support one-click films? |
Support 4 kinds of one-click short film mode, respectively: sky punch, flutter, surround, fade away. |
Does the EVO Nano series support portrait mode? |
Support and selectable close-up/medium/telephoto shots. |
Does EVO Nano series support auto-following? |
Support for automatic follow-up of selected targets is available through the Autel Sky app. |
Does the EVO Nano series support panoramic photography? |
Support horizontal / vertical / wide angle shot / spherical shot. |
Does the EVO Nano series support time-lapse? |
Supports surround time-lapse and free time-lapse. |
Battery |
What is the maximum battery life of EVO Nano series? |
About 28 minutes (windless environment). |
How to charge the battery? |
You can use the Type-C charging cable to charge directly to the aircraft charging port and adapter, or you can use Multi-charger to charge the battery. |
How long does it take to charge the battery? |
Each battery takes approximately 90 minutes to fully charge. |
How to maintain the battery? |
1. do not expose the battery to temperatures below -10°C or above 40°C, which will shorten the battery life and may result in fire, explosion or other permanent damage.
2. Do not charge the battery immediately after a flight, it is recommended to wait until the battery has cooled down to room temperature before charging.
3. the ideal ambient temperature for charging the battery is 10 °C~30 °C;
4. the ideal storage temperature for the battery is 22 °C~28 °C. The battery should be stored in a waterproof and moisture-proof environment, and protected from sunlight.
5. Recharge and discharge the battery every 3 months to keep it active. |
Can the battery be used in low-temperature environments? |
When the battery is used in a low-temperature environment, note that the battery life will be reduced. To optimize performance in the cold, it is recommended to warm the battery up to 15 °C before use. |
Can the battery be carried onto a boarding airplane? |
The capacity of the battery is 17.32Wh and can be carried on board airplanes according to airline regulations. |
APP & Firmware
Upgrade |
How to upgrade the Autel Sky App? |
When the system detects a new App version, the App will automatically pop up a prompt after connecting to the flight, and users can follow the prompt to upgrade the App. |
What smart phone systems does Autel Sky app support? |
iOS 12.0 and above
Android 8.0 and above |
How to upgrade the firmware? |
Method 1: Download the firmware upgrade package from Autel Sky app
1. Open the remote controllor and the aircraft, connect your phone to the remote controllor and run the Autel Sky app.
2. When the system detects a new firmware version, Autel Sky app will automatically pop up a prompt box after connecting to the aircraft to remind you to download and install.
3. Please follow the instructions on the Autel Sky app to update the firmware, users can check the upgrade process through the app interface.
4. Please restart the flight device and remote control after the upgrade is completed.Method 2: Download the firmware upgrade package from the official website of Autel Robotics
1. Visit the official website of Autel Robotics to download the firmware upgrade package: www.autelrobotics.com.
2.Insert the SD card into your computer and save the downloaded firmware package to the root directory of the SD card.
3.Turn on the remote controllor and the aircraft, connect your phone to the remote controllor and run the Autel Sky app.
4. Insert the SD card into the aircraft, the upgrade process will start automatically, users can check the upgrade process through the app interface.
5. Please restart the aircraft and remote controllor after the upgrade is completed. |
What will cause the upgrade to fail? |
a.If you turn off the device during the upgrade process, it will cause the upgrade to fail.
b.If you disconnect during the firmware package download process, the upgrade will fail.
c.Make sure the remaining power of the battery and remote control is ≥ 30% before upgrading. |
Can I disconnect from the network to continue the upgrade after the firmware download is completed? |
Yes. |
jumpy1 (verified owner) –
I have just purchased a Nano Plus from Kingfisher and I am stunned how good this little drone is. Beautiful photo’s and video’s. I have a Mavic 3 and I am starting to prefer the Nano Plus. Kingfisher were absolutely great to deal with. I will be using them for all my purchases from now on. This is the first non Dji drone I have ever bought. I use it for Real Estate shots and they are perfect. Also no geofencing is great.